DT4100 Dante Network Wall Speaker

Name: DT4100 Dante Network Wall Speaker
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● High fidelity speaker with Dante Network transmission protocol
● Support cascade connection through dual Network interface
● With Bluetooth function
● Built-in 2×25W high fidelity digital amplifier, low power consumption
● Able to play background music, emergency paging and alarm signal from host
● With two auxiliary audio input, two auxiliary audio output and one MIC input
● Support manual adjustment of local output volume, Network output volume and MIC volume
● With two independent signal channels– L and R

Contact now Leave message

Introduction
Specification

DT4100 is a high fidelity speaker with Dante LAN digital audio transmission technique and Bluetooth function. Input and output between Dante devices is realized through matrix. It support cascade connection with dual network interface. Cat-5 cable makes it possible to transmit in long distance. There are two auxiliary audio input interfaces to connect with other audio source equipment such as DVD. There are two auxiliary audio output interface to connect with other amplifiers to extend power. It also has one MIC interface for remote paging.

Item	DT4100
Rated output power	25W × 2
Output Manner	4Ω
AUX output level	≥900mV
Minimal EMF source	MIC：≤6Mv (Unbalanced)
Minimal EMF source	line：≤300mV (Unbalanced)
Frequency Response	50Hz-20kHz(±3dB)
THD	≤1% (1kHz, normal working status)
SNR	LINE input:≥75dB (Bandwidth)
Protection	AC fuse, over-current, overheat, over-voltage,low voltage,overload, short circuit
Mute function	Micinput override other input
Power	AC 220V/50Hz
Rated power consumption	85W
Package Size (mm)	(L×W×H)590×275×390
Machine Size (mm)	(L×W×H)310×215×200
Gross Weight	11kg
Net Weight	4kg

PREV: DT4200P Dante Conference Microphone

NEXT: DT4115E Mini POE Dante Amplfier

Relate Products

DT4300 16x16 Dante Digital Audio ProcessorDecember 5, 2017Dante LAN digital audio transmission technique is adopted with no suppression, no dissipation, and no delay. It is easy to install and there are 48 kHz audio sampling and 512×512 channels. Input and output between Dante devices are realized through a matrix. There are 16 auxiliary input and output interfaces.view
DT4200P Dante Conference MicrophoneJune 4, 2018DT4200P is a desktop microphone with the function of Dante, which is suitable for quick installation of any gooseneck microphone with XLRM cannon head. The microphone holder has a light touch switch, ...view
DT4200E Dante Network MicrophoneDecember 5, 2017DT4200E is a desktop microphone with Dante function. Tact switch is set on the pedestal of the microphone. Red LED light tells the status of the microphone. Delicate design in modern style of the pede...view

Leave a Message Email Us

we will contact you within 24 hours.