POE6463B POE Wall Mount Speaker

Name: POE6463B POE Wall Mount Speaker
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● 100/10Mbps, TCP/IP network transmission protocol adaptive
● High class waterproof grille, engineering plastic mold design
● Built-in 10W high-efficiency digital amplifier with low power-consuming.
● Audio source includes: Background music, emergency call, and alarm from the Host
● 1 auxiliary audio input, 1 auxiliary audio output and 1 microphone input
● 100V local emergency input, easy to connect with the local fire alarming system
● Accept infrared remote control
● POE power supply, easy for installation and cable laying
● Signal state LED indication, working state and information change digital display
● It can be controlled by the infrared remote controller.
● It supports power supply in POE IEEE802.3AT mode.

Contact now Leave message Download

Introduction
Specification
Connection

POE6463B is a network full digital signal processor Hi-Fi speaker based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent control of the system center, this terminal serves to output the long distance audio data flow. Built in MP3 player, USB port, and SD slot, for local program playing. With 1 aux input to connect with other audio source equipment; 1 aux audio output for connection with other amplifiers for power extension; and 1 MIC input for local Paging.

Item		Technical specifications
AUX input	Input impedance	>10kΩ
	Input sensitivity	1000 mV
	Frequency response	50Hz-20kHz
	Distortion	≤0.1%
	Signal-to-noise ratio	≥80 dB
MIC input	Input impedance	>600Ω
	Frequency response	50Hz-20kHz
	Distortion	≤1%
	Signal-to-noise ratio	≥75 dB
AUX output	Output impedance	<50Ω
	Output sensitivity	1000mV
	Frequency response	50Hz-20kHz
	Distortion	≤0.1%
	Signal-to-noise ratio	≥75 dB
Power amplifier output	Power	10W/4Ω
	Frequency response	50Hz-20kHz
	Distortion	≤0．1%
	Signal-to-noise ratio	≥80dB
Built-in amplifier	Digital amplifier	1x10W
Built-in speaker	Maximum sound pressure level	≥100dB
	Power	10W/4Ω
	Frequency response	50Hz-20kHz
	Distortion	≤0．1%
	Signal-to-noise ratio	≥80dB
Interface	Dual Ethernet interface	CAT-5
	AUX input	RCA jack
	AUX output	RCA jack
	MIC input	6.3 Socket
	Auxiliary speaker output	3.81MM Phoenix socket
Digital audio parameters	Decoding format	Support PCM\MP3 format
	Sampling rate	8k-48kHz
	Package size (L×W×H mm)	590×275×390
	Machine size (L×W×H mm)	310×215×200
	Net weight	4.2kg

PREV: POE6401 IP Network Terminal with Built-in Amplifier (Customized)

NEXT: POE6463 POE Powered Network Wall Mount Speaker

Relate Products

POE6310 IP Network Terminal with Built-in AmplifierNovember 14, 2018POE6310 network display terminal is a networked all-digital analog-digital conversion signal processor based on TCP/IP transmission protocol, which adopts the dual network design, and can be coupled a...view
POE6311 POE IP Network Ceiling SpeakerNovember 14, 2018POE6311 IP network ceiling speaker is a network of all-digital analog-digital conversion signal processor based on the TCP / IP transmission protocol. With dual network port design, it can be attached...view
POE170 Outdoor Network Horn SpeakerNovember 17, 2020The product is a network active horn speaker supporting network broadcast intercom system. It cam support the international standard SIP protocol and accept broadcasts and calls from LAN and WAN. It c...view

Leave a Message Email Us

we will contact you within 24 hours.