MAG6504 IP Network Intercom Terminal with Amplifier

Name: MAG6504 IP Network Intercom Terminal with Amplifier
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Dual-network redundancy design, able to work cross network segment
● Able to be installed to any place where there is network.
● Built-in MP3 player, with USB interface and SD interface to play local program
● Built-in speaker and MIC, with intercom function
● Support maximum 48kHz sampling rate, 16 bit digital audio decoding
● Built-in 2 15W or 1 15W high fidelity digital amplifier, low power consumption
● Able to play background music, emergency paging and alarm signal from system host
● Aluminum alloy industrial panel
● Embedded structure, easy to install and use

Contact now Leave message

Introduction
Specification
Connection

MAG6504 network industry intercom terminal is a network analog-digital signal conversion processor based on TCP/IP communication protocol. Dual-network redundancy design makes it possible to any place where there is network. Remote digital data flow could export audio signal through this device, which is controlled by host. There is built-in MP3 player, 2W speaker and microphone with intercom function. You could also play local MP3 program by using DS card. SD card could be used to executive timing function instead of being controlled by network host. There is one audio input interface to connect with other audio equipment (such as DVD). There is one auxiliary audio output interface to connect with other amplifiers to extend power. There is also a MIC interface to realize local paging. The panel is made of high quality aluminum alloy with embedded design. It is able to meet the need of schools, banks and city safety projects.

Item		Parameter
AUX IN	Input sensitivity	1000mV
	Frequency response	10Hz-26kHz
	Distortion	0.1%
	Noise	2mV
	SNR	75dB
AUX OUT	Output sensitivity	1000mV
	Frequency response	10Hz-26kHz
	Distortion	0.1%
	Noise	0.22mV
	SNR	73dB
Maximum power of built-in amplifier	Standalone channel mode	25W/4Ω
Maximum power of built-in amplifier	BTLmode	50W/8Ω
Max harmonious distortion of built-in amplifier		0.3%
Built-in speaker		2W
MICinput	Input sensitivity	10mV
	Frequency response	20Hz-23kHz
	Distortion	0.5%
	Noise	2.5mV
	SNR	70dB
MP3	Output sensitivity	11V
	Frequency response	10Hz-26kHz
	Distortion	0.1%
	Noise	2mV
	SNR	75dB
External U disk capacity		32GB
Power supply range		45-256V/50Hz
Protection		Support

MAG6504 IP Network Intercom Terminal with Amplifier

PREV: MAG6405 IP Network Time Calibrator

NEXT: MAG6406 IP Network SOS Terminal with Amplifier (wall-mount type)

Relate Products

MAG6405 IP Network Time CalibratorNovember 8, 2017MAG6405 GPS calibration module is based on the need for an accurate clock source of the transmission box, the main realization of GPS school calibration function, telephone broadcasting, SMS broadcast...view
POE1028 SNR Self-adaptive PoE Network SensorJuly 28, 2020The device will automatically adjust the volume of the broadcast sound to make it larger than the on-site ambient sound; otherwise, when the on-site ambient sound is detected too much smaller than the...view
MAG6265 IP Network Video Intercom TerminalNovember 8, 2017The MAG6265 is a network visual intercom device for bi-directional intercom with the visual broadcast intercom management host. It can be used in LAN or WAN (depending on the actual situation) via net...view

«
1
2
3
4
... 6
»

Leave a Message Email Us

we will contact you within 24 hours.