Guangzhou DSPPA Audio Co., Ltd.
Products
Contact
Email: export@dsppa.com
Tel: 020-28346138
Fax: 020-81305947

POE6401 POE Powered 2x10W Network Display Terminal

Features:

● Built-in network decoder and amplifier
● With 4-8Ω low impedance speaker outputs
● With 2x10W/1x20W digital amplifier
● Multiple audio source inputs: AUX, Mic, USB, SD
● 24V EMC of short circuit output
● 1 AUX output of RCA for power extension
● Can link with MAG6402 network audio display panel
● Support operation across network segments
● With POE power supply
  • Introduction
  • Specification
  • Connection

POE6401 Network PA system terminal is a POE powered network full digital signal processor based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent control of the system center, this terminal serves to output the long distance audio data flow.  Built in MP3 player, USB port, and SD slot, for local program playing.  With 1 aux input to connect with other audio source equipments; 1 aux audio output for connection with other amplifiers for power extension; and 1 MIC input for local Paging.

Indicator item

Indicator

AUX IN

Input sensitivity

1000 mV

Frequency response

20Hz-20kHz

Distortion

0.1%

Noise

1mV

Signal-to-noise ratio

80 dB

AUX OUT

Output sensitivity

1000mV

Frequency response

2Hz-26kHz

Distortion

0.05%

Noise

0.12 mV

Signal-to-noise ratio

77 dB

Maximum output power of the built-in power amplifier

Independent channel mode

10W/4Ω

Maximum harmonic distortion of the built-in power amplifier

0.3%

MIC microphone input

Input sensitivity

10 mV

Frequency response

20Hz-20kHz

Distortion

0.5%

Noise

2 mV

Signal-to-noise ratio

75 dB

USB/SD

/NET

Play MP3

Output sensitivity

7.8V

Frequency response

10Hz-20kHz

Distortion

0.05%

Noise

1 mV

Signal-to-noise ratio

80dB

Capacity of external U disk supported

32GB

Range of power supply voltage

45-256V/50Hz

OVERCURRENT, overheat, over-voltage and under-voltage protection

Conforming to

Package size (L×W×H mm)

270×210×110

Machine size (L×W×H mm)

190×195×50

Net weight

1.45kg

POE6401  POE Powered 2x10W Network Display Terminal

PREV: No information

NEXT: POE6310 POE Powered 2x15W Network Terminal

Relate Products

  • POE6401  POE Powered 2x10W Network Display Terminal

    POE6401 POE Powered 2x10W Network Display Terminal

    November 30, 2016POE6401 Network PA system terminal is a POE powered network full digital signal processor based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent control of the system center, thisview
  • POE6310 POE Powered 2x15W Network Terminal

    POE6310 POE Powered 2x15W Network Terminal

    November 14, 2018POE6310 network display terminal is a networked all-digital analog-digital conversion signal processor based on TCP/IP transmission protocol, which adopts the dual network design, and can be coupled a...view
Leave a Message Email Us

we will contact you within 24 hours.

  • Tel:+86 020 37166520
  • Fax:+86 20 81305947
  • Email:export@dsppa.com
  • Address:Jianggao Town, Baiyun District, Guangzhou, China