The 2 channel power amplifiers are designed for commercial and industrial public address applications. With two separate amplifiers in a single chassis and rated power is 350W. The amplifier is design of rack mount type and its 2U height.
The Amplifier can be exchanged control signal and status information with MAG host. This product can be called dual channel amplifier or dual channel amp.
Both balanced and unbalanced line inputs are available for each channel. 70V, 100V and 200V outputs for each channel are convenient when installation and can be matched with different speakers. Individual volume and tone control function for each channel are ensured. Complete protection from over heat, over load, clip & short circuit. With indications for power, signal, clip, protection and Temp.
Model | MAG1335II |
Rated power | 350 W |
Rated output voltage | 70V/100V/200V |
Inputsensitivity | 0dBu |
S/N | ≥80dB |
Regulation ratio | ≤3dB |
Frequency response | 70Hz ~16kHz (±3dB) |
Tone | 100Hz (±10dB); 10kHz (±10dB) |
Power Consumption | 600 W |
Powerrequirement | AC220~240V/50~60Hz |
Unit Size (mm) | (L×W×H)88´483´443 |
Netweight | 26 Kg |
DA2500 2*500W Dual Channels Digital AmplifierApril 11, 2017This is a Class D digital amplifier designed for commercial and industrial public address applications. Rack mount design in 1U type and rated power is 2*500WBoth balanced and unbalanced line inputs a...view
DA3850 Digital Power AmplifierApril 19, 2022DA3850 is a newly-designed Class-D Amplifier with higher power. Being beautiful and elegant, the device is widely applied to factories, schools, hospitals, stores and many other occasions.view
DA4250 4*250W 4 Channels Digital AmplifierMarch 7, 2017This is a Class D digital amplifier designed for commercial and industrial public address applications. Rack mount design in 1U type and rated power is 4*250W.Both balanced and unbalanced line inputs ...viewwe will contact you within 24 hours.
Configuration Solution of Public Address Amplifier and Speaker (II)March 29, 2019As we all know, after the auditorium acoustical design, it is necessary to determine the power of the speaker according to a series of calculations, and then the power of the amplifier is determined b...view
Come and meet DSPPA in Infocomm China in BeijingJuly 10, 2019Come and meet DSPPA in Infocomm China in BeijingInfoComm China will be held in China National Convention Center (CNCC), Beijing, China from 17th to 19th July (Wed-Fri), 2019. For over a decade, InfoCo...view
EN
ar
bn
fr
ms
de
th
id
hi
pt
ru
es
