POE1028 SNR Self-adaptive PoE Network Sensor

Name: POE1028 SNR Self-adaptive PoE Network Sensor
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Can monitor on-site ambient sound and upload data to the PC host, automatically adjust the output volume of each zone based on the on-site ambient sound to keep the on-site SNR value.
● Adopt CAT5 for long distance transmission, connected to multiple devices through the switch.
● The PC host needs to obtain the signal sent by the sensor in real time to analyze and obtain a timely volume corresponding to the noisy degree, which is sent to the terminal to be controlled for intelligent volume control.
● Control the terminals and configure function through the host software, for example, set a terminal device to change the volume according to a certain sensor intelligently.
● The system can be provided with multiple sensors with independent control on different terminals respectively, and the audio gain of the network sensor can be flexibly configured according to site requirements.

Contact now Leave message Download

Introduction
Specification

The device will automatically adjust the volume of the broadcast sound to make it larger than the on-site ambient sound; otherwise, when the on-site ambient sound is detected too much smaller than the broadcast sound as the broadcast sound is too loud, the device will automatically adjust the volume of the broadcast sound, so that visitors can hear the broadcast sound in an appropriate volume.

Model	PoE1028
Frequency Response	100Hz-10kHz(±3dB)
Noise Detection	50dB-100dB
Rated Power	2.6W
Power Supply	PoE 48V/DC+12V
Connection Method	CAT5,RJ45 interface
Package Dimension (L×W×H mm)	490×290×150mm
Machine Dimension (L×W×H mm)	136×136×115mm
Gross Weight	0.85KG
Net Weight	0.35KG

PREV: MAG6416II 32-channel Fire Linkage Module

NEXT: MAG6411 Audio Acquisition Module

Relate Products

MAG6505 Network industrial intercom terminalAugust 30, 2017MAG6505 network industrial intercom terminal is a full-digital A/D conversion signal processor based on TCP / IP transmission protocol, dual network redundancy design, for wall mount use at any place....view
MAG6265 IP Network Video Intercom TerminalNovember 8, 2017The MAG6265 is a network visual intercom device for bi-directional intercom with the visual broadcast intercom management host. It can be used in LAN or WAN (depending on the actual situation) via net...view
MAG6416II 32-channel Fire Linkage ModuleMay 18, 2020MAG6416II 32-channel fire connection module is the interface between network PA system and fire center. When receiving the alarm signal sent by the fire center, it will activate the DSPPA network PA s...view

«
1
2
3
4
5
6
7
... 9
»

Leave a Message Email Us

we will contact you within 24 hours.