POE6463B POE Wall Mount Speaker

Name: POE6463B POE Wall Mount Speaker
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● It can be coupled at any place with access to the network.
● It has an MP3 decoding play function.
● It supports a maximum 48kHz sampling rate and 16-bit digital audio bit stream decoding.
● The rated output power of the main speaker is 15W when the output of the built-in amplifier is not connected to a sub-speaker, and the rated output power of the main and sub-speakers is 2*8W when connected to a sub-speaker.
● It can play the background music, emergency paging, and alarm signal and so on from the system host machine.
● It has a way auxiliary audio input interface, a way auxiliary audio output port, a way EMC emergency output port and 1-way short circuit output, as well as 1-way MIC input.
● The local output volume and local playing state are controllable.
● Signal state LED indication, working state and information change digital display.
● It can be controlled by the infrared remote controller.
● Provide a complete interface that complies with the IEEE 802.3af/at standard of the Power over Ethernet (PoE) system.

Contact now Leave message Download

Introduction
Specification
Connection

POE6463B is a network full digital signal processor Hi-Fi speaker based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent control of the system center, this terminal serves to output the long distance audio data flow. Built in MP3 player, USB port, and SD slot, for local program playing. With 1 aux input to connect with other audio source equipment; 1 aux audio output for connection with other amplifiers for power extension; and 1 MIC input for local Paging.

Model		PoE6463
AUX IN	Input sensitivity	320mV
	Frequency response	40Hz-20kHz(±3dB)
	Distortion	≤1%
	Signal-to-noise ratio	≥75 dB
AUX OUT	Rated Output	1V
	Frequency response	25Hz-20kHz(±3dB)
	Distortion	≤1%
	Signal-to-noise ratio	≥75dB
USB/SD /NET/MP3	Frequency response	40Hz-20kHz(±3dB)
	Distortion	≤1%
	Signal-to-noise ratio	≥70dB
100V Audio Output	Rated input power	30W
Maximum Output Power of Built-in Amplifier	Connected to a sub speaker	8W*2/8Ω
Maximum Output Power of Built-in Amplifier	Not connected to a sub speaker	15W/8Ω
Maximum Harmonic Distortion of Built-in Amplifier		1%
Display Screen		Digital screen
Package Size (L×W×H mm)		590×275×390
Machine Size (L×W×H mm)		310×215×200
Gross Weight		11.5kg
Net Weight		4.55kg

PREV: POE6401 IP Network Terminal with Built-in Amplifier (Customized)

NEXT: POE6463 POE Powered Network Wall Mount Speaker

Relate Products

POE6310 IP Network Terminal with Built-in AmplifierNovember 14, 2018POE6310 network display terminal is a networked all-digital analog-digital conversion signal processor based on TCP/IP transmission protocol, which adopts the dual network design, and can be coupled a...view
DSP170E IP Network POE Active Outdoor Horn SpeakerApril 14, 2020The product is a network active horn speaker supporting network broadcast intercom system. It can support the international standard SIP protocol and accept broadcasts and calls from LAN and WAN. It c...view
DSP6114E DSP6116E PoE Outdoor Waterproof Column SpeakerJanuary 20, 2024The product DSP6114E / DSP6116E is an outdoor waterproof column speaker supporting POE and POE+ standards. It can automatically configure the output power according to the switch, and can also supply ...view

Leave a Message Email Us

we will contact you within 24 hours.