POE6401 IP Network Terminal with Built-in Amplifier (Customized)

Name: POE6401 IP Network Terminal with Built-in Amplifier (Customized)
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Built-in network decoder and amplifier
● With 4-8Ω low impedance speaker outputs
● With 2x10W/1x20W digital amplifier
● Multiple audio source inputs: AUX, Mic, USB, SD
● 24V EMC of short circuit output
● 1 AUX output of RCA for power extension
● Can link with MAG6402 network audio display panel
● Support operation across network segments
● With POE power supply

Contact now Leave message Download

Introduction
Specification
Connection

POE6401 Network PA system terminal is a POE powered network full digital signal processor based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent control of the system center, this terminal serves to output the long distance audio data flow. Built in MP3 player, USB port, and SD slot, for local program playing. With 1 aux input to connect with other audio source equipments; 1 aux audio output for connection with other amplifiers for power extension; and 1 MIC input for local Paging.

Indicator item		Indicator
AUX IN	Input sensitivity	1000 mV
	Frequency response	20Hz-20kHz
	Distortion	0.1%
	Noise	1mV
	Signal-to-noise ratio	80 dB
AUX OUT	Output sensitivity	1000mV
	Frequency response	2Hz-26kHz
	Distortion	0.05%
	Noise	0.12 mV
	Signal-to-noise ratio	77 dB
Maximum output power of the built-in power amplifier	Independent channel mode	10W/4Ω
Maximum harmonic distortion of the built-in power amplifier		0.3%
MIC microphone input	Input sensitivity	10 mV
	Frequency response	20Hz-20kHz
	Distortion	0.5%
	Noise	2 mV
	Signal-to-noise ratio	75 dB
USB/SD /NET Play MP3	Output sensitivity	7.8V
	Frequency response	10Hz-20kHz
	Distortion	0.05%
	Noise	1 mV
	Signal-to-noise ratio	80dB
Capacity of external U disk supported		32GB
Range of power supply voltage		45-256V/50Hz
OVERCURRENT, overheat, over-voltage and under-voltage protection		Conforming to
Package size (L×W×H mm)		270×210×110
Machine size (L×W×H mm)		190×195×50
Net weight		1.45kg

PREV: No information

NEXT: POE6463B POE Wall Mount Speaker

Relate Products

POE6463B POE Wall Mount SpeakerNovember 30, 2016POE6463B is a network full digital signal processor Hi-Fi speaker based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent con...view
POE6310 IP Network Terminal with Built-in AmplifierNovember 14, 2018POE6310 network display terminal is a networked all-digital analog-digital conversion signal processor based on TCP/IP transmission protocol, which adopts the dual network design, and can be coupled a...view
PoE255II Network Outdoor Waterproof Column SpeakerMay 6, 2022PoE255 Network Outdoor Waterproof Column Speaker is a network play terminal with audio data streaming based on the TCP/IP transmission protocol, which can be mounted to any place accessible to network...view

«
1
2
3
4
... 7
»

Leave a Message Email Us

we will contact you within 24 hours.