DDA43A/DDA43D is a DSP digital amplifier of 4*450W@4Ω/ 4*300W @8Ω, bridge 2*900W @8Ω, support constant pressure 70V/100V (bridge 2*612.5W@70V / 2*900W@100V). It can monitor the status of amplifier and adjust the function of DSP in real time and remotely. DSP functions of built-in: noise gate, matrix mixer, PEQ, crossover, delay, compressor etc. Support 4 channels Dante Network audio, suitable for various environments.
Model | DDA43A | DDA43D (Dante) |
Input PEQ | 15 PEQS | |
Output PEQ | 10 PEQS | |
Crossover | Butterworth 6~48, Bessel 12~48, Linkwitz-Riley 12~48 | |
Delay | Input Delay:4*100ms / Output Delay:4*20ms | |
Output Compressor | Knee, Threshold, Attack, Ratio, Release | |
Output Limiter | Threshold -90~21dBu、Release 1~2895ms | |
DSP Presets | 30 (No.1 for default preset) | |
Control port | TCP/IP, USB, RS485, RS232, GPIO | |
Network Specification | 2*RJ45, TCP/IP, 1000base-T/100base-TX | |
Channel | 4 | |
Power | 4*300W@8Ω 4*450W@4Ω | |
Bridge Power | 2*900W@8Ω | |
100V | Bridge, Power: 2*900W | |
70V | Bridge, Power: 2*612.5W | |
Input Interface | Balance 4*XLR | |
Output Interface | 4*Binding post | |
Cooling Mode | 2*fans intelligent control | |
Gain | 6dBu: 30dB (29.5 times); 0dBu: 36dB (31.1 times) | |
Maximum Input Level | 0dB Sens. LV: 8dBu (1.94V); 6dB Sens. LV: 14dBu (3.88V) | |
SNR | 6dBu:97dB; 0dBu:97dB | |
Frequency Response | 20Hz ~ 20kHz (±0.5dB)@1W to full power, 8Ω | |
THD+N | <1%@1W-full power | |
Sample Rate | 48K/24bit | |
Channel Isolation | <-70dB | |
Work Mode | Stereo, Bridge, Mono, free Matrix | |
Remote Control | Standby, Call, DSP functions | |
Amplifier Monitor | Temperature, Power, Current and Voltage | |
Constant Pressure and Resistance | 100V, 70V, 8Ω, 4Ω | |
DANTE Function | - | 4 channels |
Display | 320x240pixel, 2inch IPS LCD | |
Protection Mode | DSP limiter, high temperature, DC, high frequency, short circuit, back EMF, peak current limiter, Back EMF, Surge current limiter, startup delay, power circuit breaker protection, power over voltage/under voltage protection | |
PC Software | Mconsole | |
Net weight | 4kg | |
Device size | 483mm*305mm*44.5mm | |
Power Supply | VAC100~240 50/60Hz | |
DM300 DSP Active Amplifier ModuleSeptember 9, 2020DM300 is a 300W active power amplifier module with one input and two outputs that supports DSP function. Its simple software interface can be matched with real-time settings of compressor, limiter, no...view
DP8001 8 channels Conference Audio ProcessorAugust 5, 2020DP8001 is a conferencing processor with 8 inputs and 8 outputs, with DSP functions of built-in feedback suppression, automatic mixing, matrix mixer, equalizer, crossover, compressor ec.view
DDA43D IP Network Digital Amplifier with DSP and DanteDecember 30, 2021DDA43A/DDA43D is a DSP digital amplifier of 4*450W@4Ω/ 4*300W @8Ω, bridge 2*900W @8Ω, support constant pressure 70V/100V (bridge 2*612.5W@70V / 2*900W@100V). It can monitor the status of amplifier ...viewwe will contact you within 24 hours.
Classification and Advantage of Conference Audio SystemMarch 29, 2019The conference audio system can be divided into discussion conference system and simultaneous interpretation system according to the different functions of the system.According to the different types ...view
DSPPA Invites You to Attend ISE 2019December 10, 2018DSPPA Invites You to Attend ISE 2019 DSPPA cordially welcome you to attend Integrated Systems Europe (ISE) in RAI Amsterdam, from Feb 5 to 8 2019. The booth number is 7-A200. You can register for fre...view
EN
ar
bn
fr
ms
de
th
id
hi
pt
ru
es
