DDA43A/DDA43D is a DSP digital amplifier of 4*450W@4Ω/ 4*300W @8Ω, bridge 2*900W @8Ω, support constant pressure 70V/100V (bridge 2*612.5W@70V / 2*900W@100V). It can monitor the status of amplifier and adjust the function of DSP in real time and remotely. DSP functions of built-in: noise gate, matrix mixer, PEQ, crossover, delay, compressor etc. Support 4 channels Dante Network audio, suitable for various environments.
Model | DDA43A | DDA43D (Dante) |
Input PEQ | 15 PEQS | |
Output PEQ | 10 PEQS | |
Crossover | Butterworth 6~48, Bessel 12~48, Linkwitz-Riley 12~48 | |
Delay | Input Delay:4*100ms / Output Delay:4*20ms | |
Output Compressor | Knee, Threshold, Attack, Ratio, Release | |
Output Limiter | Threshold -90~21dBu、Release 1~2895ms | |
DSP Presets | 30 (No.1 for default preset) | |
Control port | TCP/IP, USB, RS485, RS232, GPIO | |
Network Specification | 2*RJ45, TCP/IP, 1000base-T/100base-TX | |
Channel | 4 | |
Power | 4*300W@8Ω 4*450W@4Ω | |
Bridge Power | 2*900W@8Ω | |
100V | Bridge, Power: 2*900W | |
70V | Bridge, Power: 2*612.5W | |
Input Interface | Balance 4*XLR | |
Output Interface | 4*Binding post | |
Cooling Mode | 2*fans intelligent control | |
Gain | 6dBu: 30dB (29.5 times); 0dBu: 36dB (31.1 times) | |
Maximum Input Level | 0dB Sens. LV: 8dBu (1.94V); 6dB Sens. LV: 14dBu (3.88V) | |
SNR | 6dBu:97dB; 0dBu:97dB | |
Frequency Response | 20Hz ~ 20kHz (±0.5dB)@1W to full power, 8Ω | |
THD+N | <1%@1W-full power | |
Sample Rate | 48K/24bit | |
Channel Isolation | <-70dB | |
Work Mode | Stereo, Bridge, Mono, free Matrix | |
Remote Control | Standby, Call, DSP functions | |
Amplifier Monitor | Temperature, Power, Current and Voltage | |
Constant Pressure and Resistance | 100V, 70V, 8Ω, 4Ω | |
DANTE Function | - | 4 channels |
Display | 320x240pixel, 2inch IPS LCD | |
Protection Mode | DSP limiter, high temperature, DC, high frequency, short circuit, back EMF, peak current limiter, Back EMF, Surge current limiter, startup delay, power circuit breaker protection, power over voltage/under voltage protection | |
PC Software | Mconsole | |
Net weight | 4kg | |
Device size | 483mm*305mm*44.5mm | |
Power Supply | VAC100~240 50/60Hz | |
DDA410/DDA410D IP Network Digital Amplifier with DSPSeptember 2, 2020DDA410D is a multi-functional network DSP digital power amplifier, which can remotely monitor the status of the power amplifier, and set the compressor, limiter, noise gate, parametric equalization, m...view
DDA408/DDA408D IP Network Digital Amplifier with DSP and Optional DanteAugust 16, 2024This device is a multi-functional network DSP digital power amplifier. It can monitor the status of amplifier and adjust the function of DSP in real time remotely. Built-in DSP functions with compress...view
DDA23 IP Network Digital Amplifier with DSPAugust 4, 2020DDA23/DDA23D is a multifunctional network DSP digital constant-resistance and constant-voltage amplifier of 2*450W@4Ω, 2*300W@8Ω, bridge 1*900W@8Ω, and constant voltage 70/100V, which can remotely monitor the status of amplifier in real time, and set the compressor, limiter, noise gate, PEQ, matrix mixer, delay and other DSP functions in real time, with simple software interfaces to provide simple settings and operating experience for customers, and with various connection methods for good configurability and scalability, suitable for various use environments.viewwe will contact you within 24 hours.
Configuration Solution of Public Address Amplifier and Speaker (II)March 29, 2019As we all know, after the auditorium acoustical design, it is necessary to determine the power of the speaker according to a series of calculations, and then the power of the amplifier is determined b...view
Introduction of Wall Mounted Active SpeakersAugust 6, 2018Wall mounted active speaker box is a whole set of sound system, which consists of a sound source input device, a signal amplifier (power amplifier) and wall mounted speaker. Wall mounted sound: it is ...view
EN
ar
bn
fr
ms
de
th
id
hi
pt
ru
es
