DDA408/DDA408D IP Network Digital Amplifier with DSP and Optional Dante

Name: DDA408/DDA408D IP Network Digital Amplifier with DSP and Optional Dante
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Dante network audio 4 channels in option.
● Network TCP/IP control and manage multiple devices.
● Remote on/off amplifier.
● 4.3” IPS colorful capacitive touch display.
● Build-in DSP processor.
● Support multiple connection: USB, TCP/IP, RS232, RS485.
● Real time remotely monitor status of amplifier.
● Support identified by software on site.
● Support working mode: Matrix, Bridge, free switch.
● Support 0dBu/6dBu/12dBu sensitivity three level adjustment, you can adjust it in software or display.
● Standard configured with FIR function, support 4x2048 Taps.
● Support constant pressure and resistance: 100V, 70V, 8Ω, 4Ω.
● Mconsole software can control media matrix processor, professional speaker processor at the same time.
● Wide voltage operation through 180~264VAC.

Contact now Leave message Download

Introduction
Specification

This device is a multi-functional network DSP digital power amplifier. It can monitor the status of amplifier and adjust the function of DSP in real time remotely. Built-in DSP functions with compressor, limiter, noise gate, PEQ, matrix mixer, delay etc. Mconsole software with its elegant interface provides people with easy setup and nice operation experience. Varieties of connection methods make it configurable and extensible. It is suitable for various occasions in the PA project.

Model	DDA408/DDA408D	DDA410/DDA410D	DDA415/DDA415D
Number of Channels	4	4	4
Power	4800W@8Ω 41600W@4Ω	41000W@8Ω 41600W@4Ω	41500W@8Ω 42000W@4Ω
Bridged Power	2*3200W@8Ω	2*3200W@8Ω	2*3200W@8Ω
100V	Bridge, Power: 2*1250W	Bridge, Power: 2*1250W	4*2000W
70V	4*1225W	4*1225W	4*1225W
Minimum Output Impedance	4Ω per channel
Input Interface	Balanced input 4*XLR
Output Interface	4Spoken; 4terminal blocks
Maximum Input Level	20dBu/7.75V
Sensitivity	12dBu: 28.3dB (26x) 6dBu: 34.3dB (51.8x) 0dBu: 40.3dB (103.5x)	12dBu: 29.3dB (29x) 6dBu: 35.3dB (58.2x) 0dBu: 41.3dB (116x)	12dBu: 31dB (35.5x) 6dBu: 37dB (70.8x) 0dBu: 43dB (141.3x)
S/N Ratio	100dB@12dBu, 1kHz
Frequency Response	20Hz ~20kHz (±0.5dB) @1W，8Ω
THD+N	<1%@1W, to full power
Sampling Frequency	48k/24bit
Constant Voltage and Impedance	100V&70V, 8Ω&4Ω
Dante (Optional)	4-channel Dante
Display Screen	4.3" IPS capacitive touch screen
Protection	Audio limiter, high temperature, DC, high frequency, short circuit, back electromotive force (EMF), peak current limiter, surge current limiter, power-on delay, power circuit breaker protection, and power overvoltage/undervoltage protection
PC Software	Software controllable media matrix, audio processor, DSP amplifier, and active DSP module
Power Supply	Voltage input 180/264VAC
Dimensions (WDH)	485mm460mm90mm
Package Dimensions (WDH)	590mm585mm165mm
Net Weight	12.35kg
Gross Weight	16.4kg

PREV: DDA43D IP Network Digital Amplifier with DSP and Dante

NEXT: DDA415 DDA415D IP Network Digital Amplifier with DSP and Optional Dante

Relate Products

DDA410/DDA410D IP Network Digital Amplifier with DSPSeptember 2, 2020DDA410D is a multi-functional network DSP digital power amplifier, which can remotely monitor the status of the power amplifier, and set the compressor, limiter, noise gate, parametric equalization, m...view
DP800F Touch Screen Wire Control TerminalNovember 6, 2020DP800F is a fast and convenient function accessory in the DP series. It has a 4" IPS capacitive touch screen with functions of quick recall of preset archives, total volume adjustment, and channel gai...view
DM300 DSP Active Amplifier ModuleSeptember 9, 2020DM300 is a 300W active power amplifier module with one input and two outputs that supports DSP function. Its simple software interface can be matched with real-time settings of compressor, limiter, no...view

Leave a Message Email Us

we will contact you within 24 hours.