DMA2500 Two-Channel Digital Mixer Amplifier

Features

● Features tactile mechanical control knobs, push buttons, and a heavy-duty rocker-type power switch.
● Two-channel amplifier where each channel can be independently DIP-switch configured for 100V/70V constant-voltage or 8Ω/4Ω constant-impedance outputs at full rated power.
● Six balanced input channels with individual volume control knobs and separate DIP switches for 48V phantom power on each channel.
● One set of RCA AUX2 inputs split into CH1 and CH2, featuring independent volume adjustments.
● One 3.5mm stereo input connector with dedicated, independent volume control for CH1 and CH2.
● Two RCA AMP IN1-2 power amplifier inputs, normalled to PRE OUT1-2 outputs by default.
● Two RCA PRE OUT1-2 preamplifier outputs controlled by CH1/CH2 volume; restricted to 1V output in 100V constant-voltage mode.
● 3.5mm stereo input and MIC1 can be configured as priority inputs, mixed together in any operating mode.
● Two RCA AUX2 OUT1-2 pass-through outputs for audio sources, bypassing CH1/CH2 volume and master level controls.
● Dedicated RJ45 port supporting up to six DMA30W remote touch control panels for adjusting CH1/CH2 volume, zone status, and EFFECT on/off.
● Customizable reverb depth and time with 3 presets and 1 user mode (L/M/S/OFF room sizes); MIC5-6 and OUTSIDE/ROOM zones can independently toggle EFFECT.
● Individual 3-band EQ controls for MIC1-6 inputs: LOW (80Hz ±12dB), MID (2.5kHz ±12dB), and HIGH (10kHz ±12dB).
● DIP-switch enabled standby mode automatically triggers after 10 minutes of audio inactivity (flashing SLEEP indicator) and wakes upon signal detection.
● Connects one DMA30N Remote Bus Network Decoding Terminal via RJ45 (providing audio, data, and power) for network decoding, offline scheduled playback, EMC dry contacts, and network AUX OUT.

Contact now Leave message Download

Introduction
Specification

This Two-Channel Digital Mixer Amplifier is specifically tuned for mosque sound reinforcement while serving as a versatile solution for gyms, meeting rooms, retail stores, and standard PA systems. When paired with the DMA30N Remote Bus Network Decoding Terminal, it utilizes a single RJ45 audio-and-data bus shared with the DMA30W Remote Control Panel, enabling streamlined installation and centralized remote control.

Brochure---DMA2240-DMA2500-DMA30W-DMA30N-Digital-Mixer-Amplifier-System_01.jpg

Brochure---DMA2240-DMA2500-DMA30W-DMA30N-Digital-Mixer-Amplifier-System_02.jpg

Model			DMA2240	DMA2500
Input Sensitivity	AUX1		250±25mV
	AUX2		250±25mV
	MIC1-6 Max. Input Sensitivity		5±1mV (potentiometer fully clockwise)
	MIC1-6 Min. Input Sensitivity		250±25mV (potentiometer fully clockwise)
AUX Frequency Response			80–16kHz (±3dB)
MIC Frequency Response			100–10kHz (±3dB)
Signal-to-Noise Ratio			≥76dB (all volumes at max)
Noise			≤8.5mV (all volumes at max)
Total Harmonic Distortion			≤1%
Line Output (CH1-2)	BUS OUT		1±0.1mV
	REC OUT		1±0.1mV
	PRE OUT		1±0.1mV (100V constant-voltage mode)
Overall Power Consumption	Idle Mode		44W	45W
	Energy-Saving Mode		24W	25W
	Rated Power Condition	100V	600W	1200W
		70V	600W	1200W
		8Ω	600W	1200W
		4Ω	600W	1200W
Power Supply			AC220-240V/50Hz
Output Power			2×240 W	2×500W
Product Dimensions (D×W×H)			483×380×88mm
Package Dimensions (D×W×H)			585×535×155mm
Net Weight			6.3kg
Gross Weight			8.8kg

PREV: DMA2240 Two-Channel Digital Mixer Amplifier

NEXT: MP6224II 250W Commercial Mixer Amplifier

Relate Products

MP6906 60W 6 Mic Conference AmplifierApril 11, 2017MP69 series power amplifiers are a type of PA conference devices that integrate the equalizing function, frequency shift function, front and back stage amplification function.view

«
1 ...
5
6
7
8
»

Leave a Message Email Us

we will contact you within 24 hours.