MAG6432 32-Channel Fire Alarm Audio-Visual Linkage Terminal

Features

● Acts as an interface between the network public address system and the fire control center.
● Automatically activates the corresponding zones of the network public address system to enter emergency broadcast mode upon receiving fire alarm signals from the fire control center.
● Provides 32 fire alarm trigger channels; alarm zones for each channel can be freely combined via host configuration.
● Each alarm channel supports line fault detection for automatic system line diagnostics.
● Supports playback of warning signals (including sirens), prerecorded alarm messages, or real-time command voice. Fire emergency broadcast and fire alarm audio-visual devices can operate in alternating cycles with configurable timing.
● Supports non-coded audio-visual alarm devices.
● Multiple units can be connected within the same network to flexibly expand control zones.

Contact now Leave message

Introduction
Specification

The 32-channel fire alarm audio-visual linkage terminal is designed to interface a network public address system with a fire alarm control center. Upon receiving fire alarm trigger signals, the terminal automatically forces the corresponding broadcast zones into emergency mode, ensuring timely and effective evacuation announcements.

Featuring flexible zone assignment, line fault detection, dual Ethernet ports, and support for alternating playback between fire alarm devices and emergency voice broadcasts, the device provides a reliable and scalable solution for fire emergency broadcasting in large-scale facilities.

Model	MAG6432
Package Dimensions	555×360×120mm
Product Dimensions	483×273×44mm
Gross Weight	4kg
Net Weight	3.3kg

PREV: MAG6418 Telephone Paging Module

NEXT: No information

Relate Products

MAG6416II 32-channel Fire Linkage ModuleMay 18, 2020MAG6416II 32-channel fire connection module is the interface between network PA system and fire center. When receiving the alarm signal sent by the fire center, it will activate the DSPPA network PA s...view
MAG6265 IP Network Video Intercom TerminalNovember 8, 2017The MAG6265 is a network visual intercom device for bi-directional intercom with the visual broadcast intercom management host. It can be used in LAN or WAN (depending on the actual situation) via net...view
MAG6441 One Key Network Visualized Intercom Terminal with cameraSeptember 26, 2024The voice and video intercom terminal uses a professional audio and video processing chip and runs an embedded Linux operating system, which is stable and reliable. It can realize functions such as ca...view

Leave a Message Email Us

we will contact you within 24 hours.