DDA23/DDA23D is a multifunctional network DSP digital constant-resistance and constant-voltage amplifier of 2*450W@4Ω, 2*300W@8Ω, bridge 1*900W@8Ω, and constant voltage 70/100V, which can remotely monitor the status of amplifier in real time, and set the compressor, limiter, noise gate, PEQ, matrix mixer, delay and other DSP functions in real time, with simple software interfaces to provide simple settings and operating experience for customers, and with various connection methods for good configurability and scalability, suitable for various use environments.
Model | DDA23 | DDA23D (Dante) |
Input Volume | Mute, phase, level detection | |
Input EQ | 5-band PEQ | |
Input Noise Gate | Attack time 1~2895ms, release time 1~2895ms, threshold level -120dBu~-60dBu | |
DSP Matrix | 2*2 matrix | |
Output EQ | 9-band PEQ | |
Crossover | Butterworth、Bessel、Linkwitz slope 6~24 | |
Output Delay | 2*16ms | |
Output Compressor | Soft knee, threshold level, attack time, compression ratio, release time | |
Output Limiter | Threshold level -90dBu~21dBu, release time 1~2895ms | |
Output Volume | Mute, phase, level detection | |
DSP Preset | 30 preset points | |
Control Method | Ethernet, USB, RS485, RS232 | |
Network Specification | TCP/IP, 1000base-T/100base-TX, RJ45 | |
Number of Channel | 2 | |
Power | 2*300W@8Ω 2*450W@4Ω | |
Bridge Power | 1*900W@8Ω | |
100V | Bridge, Power: 1*900W | |
700V | Bridge, Power: 1*612.5W | |
MIN. Output Impedance | 4Ω each channel, 8Ω in bridge mode | |
Input Interface | Balanced input 2*XLR; single-ended input 2*RCA | |
Output Interface | 2*Spoken; terminal | |
Cooling | Dual fan intelligent control | |
Gain | 6dBu sensitivity: 30dB (29.5 times); 0dBu sensitivity: 36dB (31.1 times) | |
MAX. Input Level | 8dBu（1.94V） | |
SNR | 6dBu sensitivity: 94dB; 0dBu sensitivity: 94dB | |
Frequency Response | 20Hz ~ 20kHz (±0.5dB)@1W, 8Ω | |
THD+N | <0.1%@1W to full power | |
Sampling Rate | 48K/24bit | |
Channel Isolation | <-70dB | |
Working Mode | Stereo, bridge, mono, free matrix | |
Remote Control | Power-on, standby, DSP monitor | |
Amplifier Monitor | Temperature, power, voltage, current | |
Constant Voltage and Constant Resistance | 100V, 70V, 8Ω, 4Ω | |
DANTE Function | - | 2 Channels |
Display Screen | 320*240 pixel, IPS color LCD screen | |
Audio Source Topology | XLR Line-out | |
Protection | Audio limiter, high temperature, DC, high frequency, short circuit, back EMF, peak current limiter, surge current limiter, startup delay, power circuit breaker protection, over voltage/under voltage protection | |
PC Software | The software can control media matrix, audio processor, DSP amplifier, active DSP module | |
Weight | 3kg | |
Dimensions | 483*300*44.5 | |
Power Supply | Voltage input (180/264V AC) | |
DP8005 8 channels Conference Audio Processor with ANC & AECSeptember 4, 2020DP8005 is an automatic mixing media matrix with 8 analog inputs and 8 analog outputs, built-in feedback suppression, automatic mixing, matrix mixing, equalizer, distributor, compressor and other DSP f...view
DM300 DSP Active Amplifier ModuleSeptember 9, 2020DM300 is a 300W active power amplifier module with one input and two outputs that supports DSP function. Its simple software interface can be matched with real-time settings of compressor, limiter, no...view
DDA43D IP Network Digital Amplifier with DSP and DanteDecember 30, 2021DDA43A/DDA43D is a DSP digital amplifier of 4*450W@4Ω/ 4*300W @8Ω, bridge 2*900W @8Ω, support constant pressure 70V/100V (bridge 2*612.5W@70V / 2*900W@100V). It can monitor the status of amplifier ...viewwe will contact you within 24 hours.
DSPPA | Conference & Pro Sound Systems for Large ProjectsNovember 21, 2022Abstract: Here gathers a variety of DSPPA conferences and pro-sound projects for international summits and major sports events.view
DSPPA | Letter of Thanks from Asian Games Organising CommitteeNovember 14, 2023Abstract: DSPPA was appreciated by the Hangzhou Asian Games Organising Committee for its contribution to the event's success.view
EN
ar
bn
fr
ms
de
th
id
hi
pt
ru
es
