DM300 is a 300W active power amplifier module with one input and two outputs that supports DSP function. Its simple software interface can be matched with real-time settings of compressor, limiter, noise gate, parametric equalization, matrix routing, delayer and other functions to provide smooth operating experience, and the RJ45 network port can transmit Dante network audio while supporting multiple devices hand in hand. Also, it has good configurability and extensibility, suitable for various occasions.
|
Power Ratings (RMS @1%THD @230Vac) |
|||
|
|
Impedance |
OUT L |
OUT R |
|
DM300 |
8Ω |
300W |
300W |
|
|
4Ω |
500W |
500W |
|
OutputCircuit |
D-type |
||
|
Gain |
34dB |
||
|
SNR |
>100dB |
||
|
Distortion |
<0.05% (at20Hz -20kHz, 8Ω load,3dB) |
||
|
Frequency Response |
20Hz -20kHz 0(at+0/-0.25dB, 8Ω load,3dB) |
||
|
DampingCoefficient |
>300 (at8Ω load,400kHz) |
||
|
Protection Type |
Input current limiter, short circuit protection,on/offmute, DC fault protection, power limiter |
||
|
Input Power |
Universal power supply 100-240V,50-60Hz |
||
|
DSP |
|||
|
A/D |
24bit CIRRUS LOGIC @48kHz, dynamic range114dB,100dB THD+N |
||
|
D/A |
24bit CIRRUS LOGIC @48kHz, dynamic range114dB,100dB THD+N |
||
|
Delay |
Input120ms + output20ms |
||
|
Equalizer |
High and low, graphic PEQ, support full bypass function |
||
|
Filter |
Butterworth, Linkwitz-Rayleigh, Bessel: 6dB /oct to48dB /oct(IIR) |
||
|
Compressor |
Root Mean Square Compression |
||
|
Limiter |
Peak clipping |
||
|
Dimension |
133×105×261mm |
||
|
Net Weight |
2.4kg |
||
DP8004 8 channels Conference Audio Processor with 4x4 DanteAugust 5, 2020DP8004 is a conferencing processor with 8 inputs and 8 outputs, with DSP functions of built-in feedback suppression, automatic mixing, matrix mixer, equalizer, crossover, compressor ec. DP8004 support...view
DDA23D IP Network Digital Amplifier with DSP and DanteAugust 4, 2020DDA23/DDA23D is a multifunctional network DSP digital constant-resistance and constant-voltage amplifier of 2*450W@4Ω, 2*300W@8Ω, bridge 1*900W@8Ω, and constant voltage 70/100V, which can remotely monitor the status of amplifier in real time, and set the compressor, limiter, noise gate, PEQ, matrix mixer, delay and other DSP functions in real time, with simple software interfaces to provide simple settings and operating experience for customers, and with various connection methods for good configurability and scalability, suitable for various use environments.viewDDA23 IP Network Digital Amplifier with DSPAugust 4, 2020DDA23/DDA23D is a multifunctional network DSP digital constant-resistance and constant-voltage amplifier of 2*450W@4Ω, 2*300W@8Ω, bridge 1*900W@8Ω, and constant voltage 70/100V, which can remotely monitor the status of amplifier in real time, and set the compressor, limiter, noise gate, PEQ, matrix mixer, delay and other DSP functions in real time, with simple software interfaces to provide simple settings and operating experience for customers, and with various connection methods for good configurability and scalability, suitable for various use environments.viewwe will contact you within 24 hours.
_400x400.webp)
DSPPA | Grand Opening of DSPPA Shanghai Operations Center!December 8, 2025Abstract: DSPPA marked a significant milestone with the grand opening of its Shanghai Operations Center!view
DSPPA PA System Applied in Zhanjiang Railway StationJuly 31, 2018DSPPA PA System Applied in Zhanjiang Railway Station Zhanjiang Railway Station, which is entered to operation on July 1, 2018, adopted DSPPA MAG2140II System. This railway station is a high speed rai...view
EN
ar
bn
fr
ms
de
th
id
hi
pt
ru
es
