DP8004 8 channels Conference Audio Processor with 4x4 Dante

Name: DP8004 8 channels Conference Audio Processor with 4x4 Dante
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● With 4x4 dante input and output,8 analog inputs and 8 analog outputs, support selecting microphone and line
● Each microphone input has 9 levels of sensitivity adjustment，with 48V phantom power switch
● GPIO Extensible Function
● Feedback suppressor in per input channel
● AUTO-MIX and MATRIC-MIX
● 31 PEQS per input and 10 PEQS per output
● USB free driver connect, RS232/RS485 connector for center control

Contact now Leave message Download

Introduction
Specification

DP8004 is a conferencing processor with 8 inputs and 8 outputs, with DSP functions of built-in feedback suppression, automatic mixing, matrix mixer, equalizer, crossover, compressor ec. DP8004 support Dante Network audio, suitable for various occasions in the PA project.

Model	DP8004
Signal Processor	32-bit fixed/floating-point DSP 300MHz
Audio Latency	< 1ms
A/D and D/A Converters	24-bit
Sample Rate	48KHz
Input Channels	8 balanced. Mic/line level
Connectors	3.81 mm Phoenix Contact, 12-pin
Input Impedance	11.5KΩ
Maximum Input Level	12dBu/Line, -9dBu/Mic
Phantom Power	+48VDC, 10mA, selectable per input
Output Channels	8 balanced, line level
Output Impedance	150Ω
Frequency Response	20Hz-20kHz(+-0.5dB)/Line 20Hz-20kHz(+-1.5dB)/Mic
THD+N	-90dB(@12dBu,1kHz,A-wt)/Line -86dB(@-7dBu,1kHz,A-wt)/Mic
SNR	105dB(@12dBu,1kHz,A-wt)/Line 95dB(@-7dBu,1kHz,A-wt)/Mic
USB	Micro-B type, free driver
TCP/IP	RJ-45
RS232	Phoenix seat
RS485	Phoenix seat
GPIO	Phoenix seat, Machine Archive (customizable)
LCD display & Button	LCD2402
LED Indicators	Power, Link, +48V, Input and Output Audio signal
Voltage Range	AC100V-240V 50/60 Hz
Demension	44mmx483mmx210mm
Net Weight	2.8kg
Working Temperature	-20℃--80℃

PREV: DP8001 8 channels Conference Audio Processor

NEXT: DDA410/DDA410D IP Network Digital Amplifier with DSP

Relate Products

DDA43D IP Network Digital Amplifier with DSP and DanteDecember 30, 2021DDA43A/DDA43D is a DSP digital amplifier of 4*450W@4Ω/ 4*300W @8Ω, bridge 2*900W @8Ω, support constant pressure 70V/100V (bridge 2*612.5W@70V / 2*900W@100V). It can monitor the status of amplifier ...view
DM300 DSP Active Amplifier ModuleSeptember 9, 2020DM300 is a 300W active power amplifier module with one input and two outputs that supports DSP function. Its simple software interface can be matched with real-time settings of compressor, limiter, no...view
DDA415 DDA415D IP Network Digital Amplifier with DSP and Optional DanteAugust 19, 2024This device is a multi-functional network DSP digital power amplifier. It can monitor the status of amplifier and adjust the function of DSP in real time remotely. Built-in DSP functions with compress...view

Leave a Message Email Us

we will contact you within 24 hours.