Guangzhou DSPPA Audio Co., Ltd.
Contact
Email: export@dsppa.com
Tel: 020-28346138
Fax: 020-81305947

DT4100 Dante Network Wall Speaker

Features

● High fidelity speaker with Dante Network transmission protocol
● Support cascade connection through dual Network interface
● With Bluetooth function
● Built-in 2×25W high fidelity digital amplifier, low power consumption
● Able to play background music, emergency paging and alarm signal from host
● With two auxiliary audio input, two auxiliary audio output and one MIC input
● Support manual adjustment of local output volume, Network output volume and MIC volume
● With two independent signal channels– L and R

  • Introduction
  • Specification

DT4100 is a high fidelity speaker with Dante LAN digital audio transmission technique and Bluetooth function. Input and output between Dante devices is realized through matrix. It support cascade connection with dual network interface. Cat-5 cable makes it possible to transmit in long distance. There are two auxiliary audio input interfaces to connect with other audio source equipment such as DVD. There are two auxiliary audio output interface to connect with other amplifiers to extend power. It also has one MIC interface for remote paging.

Item

DT4100

Rated output power

25W × 2

Output Manner

AUX output level

≥900mV

Minimal EMF source

MIC:≤6Mv (Unbalanced)

line:≤300mV (Unbalanced)

Frequency Response

50Hz-20kHz(±3dB) 

THD

≤1% (1kHz, normal working status)

SNR

LINE input:≥75dB (Bandwidth)

Protection

AC fuse, over-current, overheat, over-voltage,low voltage,overload, short circuit

Mute function

Micinput override other input

Power

AC 220V/50Hz

Rated power consumption

85W

Package Size (mm)

(L×W×H)590×275×390

Machine Size (mm)

(L×W×H)310×215×200

Gross Weight

11kg

Net Weight

4kg

Relate Products

  • DT4000 4x4 Dante Audio MatrixDT4000 4x4 Dante Audio MatrixDecember 5, 2017DT4000 is a high-fidelity audio adapter with distributed system. Dante LAN digital audio transmission technique is adopted. Input and output between Dante devices is realized through matrix. There are...view
  • DT4100P Dante Network Wall Mount SpeakerDT4100P Dante Network Wall Mount SpeakerMarch 22, 2017DT4100P is a PoE-powered Dante speaker with LAN digital audio transmission technique and Bluetooth function. Cat-5 cable makes it possible to transmit in long distance.There are two auxiliary audio in...view
  • DT4300 16x16 Dante Audio MatrixDT4300 16x16 Dante Audio MatrixDecember 5, 2017DT4000is an audio adapter with distributed system. Dante LAN digital audiotransmission technique is adopted withno suppression, no dissipation and no delay. It iseasy to install and there are48 kHz au...view
Leave a Message Email Us

we will contact you within 24 hours.

Related News
  • Necessity of A Meeting Room Speaker SystemNecessity of A Meeting Room Speaker SystemJune 28, 2018As we all know, the sound energy of natural sound sources (such as speech, musical instruments and singing, etc.) is very limited, and the sound pressure level attenuates rapidly with the increase of ...view
  • DSPPA Brings New IP Audio and Audio Matrix Solutions to ISEDSPPA Brings New IP Audio and Audio Matrix Solutions to ISESeptember 5, 2017DSPPA attended the 2017 ISE show at the RAI Amsterdam on 7-10 February 2017. The show was a resounding success, with more attendees than ever before and the largest floor space to date. Over 1,100 exh...view
  • Tel:+86 020 37166520
  • Email:export@dsppa.com
  • Address:Jianggao Town, Baiyun District, Guangzhou, China