MAG6416 16-Channel Fire Fighting Linkage Network Terminal
Features
● This machine is used as the interface between the networking public address system and the fire center.
● The forced interruption of the activation area is limited to the emergency area or extended to several adjacent areas,
● which shall be determined by the preprogramming of the networking mainframe.
● Each machine is able to control 16 areas and set up by means of the mainframe.
● In the same system, a number of machines are connected to the network so as to extend the area under control at will.
● The infrared remote controller is used to set up IP address.
Number of channel
|
16, extendable
|
Possibly activated adjacent area
|
Several, programmable
|
Logic level
|
+5~+24V/0V, settable
|
Protection
|
AC fuse×1
|
Power supply
|
AC 220V/50-60Hz
|
Size of
external packing (L×W×H mm)
|
555×455×185
|
Machine size (L×W×H mm)
|
483×375×88
|
Gross weight
|
8.5kg
|
Net weight
|
6.8kg
|
Relate Products
- MAG6104C 1-Channel Network Audio Output TerminalJune 8, 2023The 1-channel audio output terminal is a network and fully digital analog-to-digital signal processor based on TCP/IP transmission protocol. The machine can output the remote audio data stream as audi...view
- MAG6101C Network Playback TerminalJune 8, 2023MAG6101C network playback terminal is a network fully digital analog-to-digital signal processor based on TCP/IP transmission protocol, which can be mounted anywhere the network can reach. The machine...view
- MAG6811 1-channel Audio Output TerminalDecember 15, 2022The 1-channel audio output terminal is a network full digital analog-to-digital conversion signal processor based on the TCP/IP transmission protocol. With dual network redundancy design, it can be co...view
Related News
- Conference Audio System SolutionMarch 20, 2023Due to its specific function, the conference room must have good language clarity. In addition to being equipped with good audio equipment, it must also undergo acoustic design to provide a good acous...view
- [DAPPA] Holiday Notice of Labor DayApril 29, 2022Abstract: The holiday will be extended to five days nationwide, from April 30 to May 4, 2022. May 5 (Thursday) will be marked as the working day after the long holiday break.view