MAG6424 4 Channels Network Speaker Line Detector

Name: MAG6424 4 Channels Network Speaker Line Detector
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● 1 channel or 4 channel line detection function
● The detection range of line impedance is 20-1600 ohms
● Each power amplifier/zone has the switch setting of line detection function; e Each power amplifier/zone has the function of line impedance detection and calibration;
● Support the display of 5 states of short circuit:open circuit, overload, light load, and normal on the host partition;
● Support the system to detect when the system is idle and not to detect when it is busy;
● Built-in buzzer, alarm when the line is abnormal.

Contact now Leave message

Introduction
Specification

The device MAG6424 is a 4-channel line load detector. It is used for supporting networked PA system, and can be used with two products of networked system, one or four audio output terminals, four audio output terminals and other series of power amplifier products.

Item	Parameter
Impedance Detection Range	20Ω-2kΩ;
Impedance Open Circuit Range	>+25% Calibration Value;
Impedance Overload Range	+15%<Calibration Value<+25%
Normal Range of Impedance	-15%<Calibration Value<+15%
Impedance Light Load Range	-15%<Calibration Value<-25%
Impedance Short Circuit Range	<-25% Calibration Value
Signal Input	100V
Signal Output	100V
Power Consumption	<10W
Power Supply	AC220V/50Hz
Package Dimension(LxWxH)	555x360x120mm
Product Dimension(LxWxH)	483x273x44mm
Gross Weight	4kg
Net Weight	3.6kg

PREV: MAG6411 Audio Acquisition Module

NEXT: MAG6832 2 Channels Streaming Media Interface

Relate Products

POE1028 SNR Self-adaptive PoE Network SensorJuly 28, 2020The device will automatically adjust the volume of the broadcast sound to make it larger than the on-site ambient sound; otherwise, when the on-site ambient sound is detected too much smaller than the...view
MAG6432 32-Channel Fire Alarm Audio-Visual Linkage TerminalJanuary 9, 2026The 32-channel fire alarm audio-visual linkage terminal is designed to interface a network public address system with a fire alarm control center. Upon receiving fire alarm trigger signals, the termin...view
MAG6506 Network Industrial Intercom TerminalMay 24, 2024The MAG6506 network industrial intercom terminal is a fully digital analog-to-digital conversion signal processor based on TCP/IP transmission protocol, which can be connected to anywhere the network ...view

«
1 ...
4
5
6
7
8
9
»

Leave a Message Email Us

we will contact you within 24 hours.