MAG6463B Wall Mount IP Network Speaker

Name: MAG6463B Wall Mount IP Network Speaker
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● Integrate network terminal processor and high-fidelity speaker.
● With dual network interface, can work across the network segment.
● Can be mounted to any place with access to network.
● With MP3 decoding play function.
● Support maximum 48kHz sampling rate 16-bit digital audio stream decoding.
● Built-in 2×25W or 1×50W high-fidelity digital amplifier, with low power consumption.
● Can play the background musics, emergency paging and alarm signals from the system host.
● 1 AUX IN, 1 AUX OUT, 1 MIC IN, 1 EMC OUT and 1-channel short circuit output.
● Controllable local output volume and local play status.
● With LED indicator for signal status, and digital display of working status and information changes.
● Support remote control via the infrared remote controller.
● Can set the priority of network audio, local audio and local microphone audio through the network.

Contact now Leave message Download

Introduction
Specification
Connection

The MAG6463 wall mount IP speaker is a network all-digital analog-digital conversion signal processor with high fidelity speaker based on TCP/IP transmission protocol, to realize modern network display terminal with the overall design of the processor and speaker. With dual network redundancy design, it can be mounted to any place with access to network. The machine can output the remote audio data stream as the audio signal with intelligent control of the host; and is provided with one-channel AUX IN for other audio source devices (like DVD), one-channel AUX OUT for other amplifiers to extend the power, and a MIC IN for local paging.

Model	MAG6463
Rated Output Power	25W × 2
Output Mode	4Ω constant resistance
AUX OUT Level	≥900mV
MIN. EMF.	MIC: ≤5mV (Unbalanced)
MIN. EMF.	LINE: ≤350mV (Unbalanced)
Freq. Resp.	50Hz-18kHz（±3dB）
THD	≤0.5% (1kHz, under normal working condition)
SNR	LINE IN: ≥75dB (Broadband)
Protection	AC fuse, over current, over heat, over voltage, under voltage, overload, and short circuit.
Power Supply	AC 220V/50Hz
Power Consumption	85W
Outer Dimension (mm)	(L×W×H) 590×275×390
Machine Dimension (mm)	(L×W×H) 310×215×200
Gross Weight	11kg
Net Weight	4.3kg

PREV: No information

NEXT: MAG6463W Wall Mount IP Network Speaker

Relate Products

MAG6389L Network Outdoor Waterproof Slave Column SpeakerAugust 9, 2022MAG6389L is a 40W network outdoor waterproof slave column speaker, with waterproof unit, with high sensitivity, sound pressure level up to 108±2dB. It mainly works with the master speaker MAG6389, an...view
MAG6363 Network Indoor SpeakerJuly 24, 2018MAG6363 networked speaker is a networked all-digital analog-digital signal conversion processor with high fidelity speaker based on TCP/IP transmission protocol, so as to realize modern network displa...view
MAG8621 60W Network Column SpeakerOctober 11, 2025The Network Column Speaker is a fully digital analog-to-digital conversion processor integrated with high-fidelity speakers, operating on TCP/IP protocols. This modern networked terminal features an i...view

«
2
3
4
5
6
7
8
... 10
»

Leave a Message Email Us

we will contact you within 24 hours.