|
|
|
MG20XU/MG20 |
MG16XU/MG16 |
MG12XU/MG12 |
|
|
Frequency response |
Enter to STEREO OUT |
+0.5dB/-1.5dB (20Hz to 48kHz),Reference rated output level @ 1kHz, GAIN knob: Min |
|||
|
Total harmonic distortion(THD+N) |
Enter to STEREO OUT |
0.03 % @ +14dBu (20Hto20kHz),GAIN knob: minimum 0.005% @ + 24dBu (1kHz), GAIN knob: minimum
|
|||
|
Hum and noise*1 (20Hzto20kHz) |
Same input noise |
-128dBu(Mono input channel, Rs: 150Ω, GAIN knob: max) |
|||
|
Residual output noise |
-102dBu(STEREO OUT, STEREO Main fader: minimum) |
||||
|
Crosstalk(1kHz) *2 |
-78dB |
||||
|
Input channel |
Mono [MIC/LINE] |
12 |
8 |
4 |
|
|
Mono/Stereo [MIC/LINE] |
4 |
2 |
2 |
||
|
Stereo [LINE] |
0 |
2 |
2 |
||
|
Input channel |
STEREO OUT |
2 |
|||
|
MONITOR OUT |
1 |
||||
|
PHONES |
1 |
||||
|
AUX SEND |
4 |
4 |
2 |
||
|
GROUP OUT |
4 |
4 |
2 |
||
|
Bus bar |
stereo:1,Grouping:4,AUX:4(MG20XU:include FX> |
stereo:1,Grouping:4, AUX:4(MG16XU:include FX) |
stereo:1,Grouping:2,AUX:2(MG12XU:include FX) |
||
|
Input channel function
|
PAD (Mono) |
26dB |
|||
|
HPF (Mono, Mono/Stereo) |
80Hz, 12dB / octave (Mono / Stereo: MIC only) |
||||
|
COMP (Mono) |
Single-knob compressor (gain / threshold / ratio) threshold: +22 dBu to -8dBu, ratio: 1: 1 to 4: 1, output level: 0dB to 7dB attack time: about 25msec, release time: about 300msec |
||||
|
EQ |
HIGH: Gain: + 15dB / -15dB, Frequency: 10 kHz Slope |
||||
|
MID: Gain: + 15dB / -15dB, Frequency: Mono 250Hz - 5kHz peak Stereo 2.5 kHz peak |
MID: gain: + 15dB / -15dB, frequency: 2.5kHz peak |
||||
|
LOW :Gain: + 15dB / -15dB, frequency: 100Hz slope |
|||||
|
PEAK LED (Mono) |
The LED lights up when the post EQ signal reaches 3dB below the frame distortion |
||||
|
Level meter |
Before listening LEVEL |
2x12 - dot pitch LED level meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB] |
|||
|
Built-in digital effects (XU model) |
SPX algorithm |
24 programming, PARAMETER controller: 1, FOOT SW: 1 (FX RTN CH on / off) |
|||
|
USB audio (XU model) |
2 IN /2 0UT |
USB Audio 2.0 compatible Sampling rate: maximum 192kHz, Bit depth: 24-bit |
|||
|
Phantom power supply voltage |
+48V
|
||||
|
Power requirements |
AC100-240V,50/60Hz |
||||
|
Power consumption |
36W |
30W |
22W |
||
|
physical dimension(W x H x D) |
444mm x 130mm x 500mm (17.5”x 5.1”x 19.7”) |
444mm x 130mm x 500mm (17.5”x 5.1”x 19.7”) |
308mm x 118mm x 422mm (9.6”x2.8”x11.6”)
|
||
|
net weight |
MG20XU:7.1kg (15.7 lbs.) MG20:6.9kg (15.2 lbs.) |
MG16XU:6.8kg (15.0 lbs.) MG16:6.6kg (14.6 lbs.) |
MG12XU:4.2kg (9.3 lbs.) MG12:4.0kg(8.8 lbs.) |
||
|
Include attachments |
Technical specifications, AC power cord, Cubase AI Download information (XU Models) Cabinet mounting kit (MG20XU, MG20, MG16XU, MG16) |
||||
|
Optional accessories |
Cabinet mounting kit: RK-MG12 (for MG12XU, MG12 use), pedal switch: FC5 (XU model) |
||||
|
Operating temperature |
0 to +40℃ |
||||
MP4000 2000W PA System Power AmplifierMarch 16, 2017This amplifier is designed for commercial and industrial public address applications. Both balanced and unbalanced line inputs are available for each channel. Balanced line output feeds to another power amplifier as well as secures the signal transmission is less noise and longer distance. A master volume control is included. Complete protection includes clip, short circuit, high temp and overload. With indications for power, signal, clip, protection and temp.view
MP2500 650W 70V-100V 4-16 ohm AmplifierMarch 9, 2017This amplifier is designed for commercial and industrial public address applications. Rack mount design in 2U type and rated power is 650W. Both balanced and unbalanced line inputs are available for ea...view
PA3002/PA4002/PA5002/PA6002/PA7002/ PA Series Power AmplifierAugust 17, 2018Designed for general commercial and industrial public address applications. rated power ranges from 1000W, 1500W, and 2000W, which provides a wide selection to meet different size sound system needs. ...viewwe will contact you within 24 hours.
DSPPA New Wall Mount Speaker SeriesNovember 29, 2016Wall mount speaker are always very popular in audio reinforcement project for their flexibility in installation. However, thanks to the “Made in China” OEM, most of the OEM factories use the same ol...view
What Audio Equipment Should A Conference Room Have?October 28, 20201. MicrophoneMicrophones are indispensable in meeting rooms. It is the most important sound collection device. Collect the voices of meeting participants through microphones, and then broadcast them o...view