|
|
|
MG20XU/MG20 |
MG16XU/MG16 |
MG12XU/MG12 |
|
|
Frequency response |
Enter to STEREO OUT |
+0.5dB/-1.5dB (20Hz to 48kHz),Reference rated output level @ 1kHz, GAIN knob: Min |
|||
|
Total harmonic distortion(THD+N) |
Enter to STEREO OUT |
0.03 % @ +14dBu (20Hto20kHz),GAIN knob: minimum 0.005% @ + 24dBu (1kHz), GAIN knob: minimum
|
|||
|
Hum and noise*1 (20Hzto20kHz) |
Same input noise |
-128dBu(Mono input channel, Rs: 150Ω, GAIN knob: max) |
|||
|
Residual output noise |
-102dBu(STEREO OUT, STEREO Main fader: minimum) |
||||
|
Crosstalk(1kHz) *2 |
-78dB |
||||
|
Input channel |
Mono [MIC/LINE] |
12 |
8 |
4 |
|
|
Mono/Stereo [MIC/LINE] |
4 |
2 |
2 |
||
|
Stereo [LINE] |
0 |
2 |
2 |
||
|
Input channel |
STEREO OUT |
2 |
|||
|
MONITOR OUT |
1 |
||||
|
PHONES |
1 |
||||
|
AUX SEND |
4 |
4 |
2 |
||
|
GROUP OUT |
4 |
4 |
2 |
||
|
Bus bar |
stereo:1,Grouping:4,AUX:4(MG20XU:include FX> |
stereo:1,Grouping:4, AUX:4(MG16XU:include FX) |
stereo:1,Grouping:2,AUX:2(MG12XU:include FX) |
||
|
Input channel function
|
PAD (Mono) |
26dB |
|||
|
HPF (Mono, Mono/Stereo) |
80Hz, 12dB / octave (Mono / Stereo: MIC only) |
||||
|
COMP (Mono) |
Single-knob compressor (gain / threshold / ratio) threshold: +22 dBu to -8dBu, ratio: 1: 1 to 4: 1, output level: 0dB to 7dB attack time: about 25msec, release time: about 300msec |
||||
|
EQ |
HIGH: Gain: + 15dB / -15dB, Frequency: 10 kHz Slope |
||||
|
MID: Gain: + 15dB / -15dB, Frequency: Mono 250Hz - 5kHz peak Stereo 2.5 kHz peak |
MID: gain: + 15dB / -15dB, frequency: 2.5kHz peak |
||||
|
LOW :Gain: + 15dB / -15dB, frequency: 100Hz slope |
|||||
|
PEAK LED (Mono) |
The LED lights up when the post EQ signal reaches 3dB below the frame distortion |
||||
|
Level meter |
Before listening LEVEL |
2x12 - dot pitch LED level meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB] |
|||
|
Built-in digital effects (XU model) |
SPX algorithm |
24 programming, PARAMETER controller: 1, FOOT SW: 1 (FX RTN CH on / off) |
|||
|
USB audio (XU model) |
2 IN /2 0UT |
USB Audio 2.0 compatible Sampling rate: maximum 192kHz, Bit depth: 24-bit |
|||
|
Phantom power supply voltage |
+48V
|
||||
|
Power requirements |
AC100-240V,50/60Hz |
||||
|
Power consumption |
36W |
30W |
22W |
||
|
physical dimension(W x H x D) |
444mm x 130mm x 500mm (17.5”x 5.1”x 19.7”) |
444mm x 130mm x 500mm (17.5”x 5.1”x 19.7”) |
308mm x 118mm x 422mm (9.6”x2.8”x11.6”)
|
||
|
net weight |
MG20XU:7.1kg (15.7 lbs.) MG20:6.9kg (15.2 lbs.) |
MG16XU:6.8kg (15.0 lbs.) MG16:6.6kg (14.6 lbs.) |
MG12XU:4.2kg (9.3 lbs.) MG12:4.0kg(8.8 lbs.) |
||
|
Include attachments |
Technical specifications, AC power cord, Cubase AI Download information (XU Models) Cabinet mounting kit (MG20XU, MG20, MG16XU, MG16) |
||||
|
Optional accessories |
Cabinet mounting kit: RK-MG12 (for MG12XU, MG12 use), pedal switch: FC5 (XU model) |
||||
|
Operating temperature |
0 to +40℃ |
||||
MP1500 350W-650W Classical Series Power AmplifierNovember 15, 2016Description:This class b amplifier is designed for commercial and industrial public address applications. Rack mount design in 2U type and rated power is 350W /450W/650W.Both balanced and unbalanced l...view
MP2016IV 6 Zones Mixer Amplifier with 2 Mic&3 Line InputsApril 12, 2017This product is the best pre amp, and also can ebe called high end audio preamplifier.view
MK4135 4x130W 4-Channel Stereo Conference AmplifierDecember 24, 2025MK4135 4-Channel Stereo Conference Amplifier supports 5 MIC inputs and 3 multimedia inputs, 2 recording outputs and 8 speaker interfaces of amplifier output, with MP3 & Bluetooth function, which i...viewwe will contact you within 24 hours.
Analysis of the Main Technologies and Applications of IP Network PA SystemMarch 23, 2023What is an IP network PA system?An IP network PA system is a new type of network technology that allows for efficient broadcast communication across multiple networks. It enables large-scale data tran...view
DSPPA | Welcome to DSPPA AAA Tourist AttractionJanuary 12, 2023Abstract: Good News! From 8th January, disease control measures targeting inbound travelers have been lifted.view