|
|
|
MG20XU/MG20 |
MG16XU/MG16 |
MG12XU/MG12 |
|
|
Frequency response |
Enter to STEREO OUT |
+0.5dB/-1.5dB (20Hz to 48kHz),Reference rated output level @ 1kHz, GAIN knob: Min |
|||
|
Total harmonic distortion(THD+N) |
Enter to STEREO OUT |
0.03 % @ +14dBu (20Hto20kHz),GAIN knob: minimum 0.005% @ + 24dBu (1kHz), GAIN knob: minimum
|
|||
|
Hum and noise*1 (20Hzto20kHz) |
Same input noise |
-128dBu(Mono input channel, Rs: 150Ω, GAIN knob: max) |
|||
|
Residual output noise |
-102dBu(STEREO OUT, STEREO Main fader: minimum) |
||||
|
Crosstalk(1kHz) *2 |
-78dB |
||||
|
Input channel |
Mono [MIC/LINE] |
12 |
8 |
4 |
|
|
Mono/Stereo [MIC/LINE] |
4 |
2 |
2 |
||
|
Stereo [LINE] |
0 |
2 |
2 |
||
|
Input channel |
STEREO OUT |
2 |
|||
|
MONITOR OUT |
1 |
||||
|
PHONES |
1 |
||||
|
AUX SEND |
4 |
4 |
2 |
||
|
GROUP OUT |
4 |
4 |
2 |
||
|
Bus bar |
stereo:1,Grouping:4,AUX:4(MG20XU:include FX> |
stereo:1,Grouping:4, AUX:4(MG16XU:include FX) |
stereo:1,Grouping:2,AUX:2(MG12XU:include FX) |
||
|
Input channel function
|
PAD (Mono) |
26dB |
|||
|
HPF (Mono, Mono/Stereo) |
80Hz, 12dB / octave (Mono / Stereo: MIC only) |
||||
|
COMP (Mono) |
Single-knob compressor (gain / threshold / ratio) threshold: +22 dBu to -8dBu, ratio: 1: 1 to 4: 1, output level: 0dB to 7dB attack time: about 25msec, release time: about 300msec |
||||
|
EQ |
HIGH: Gain: + 15dB / -15dB, Frequency: 10 kHz Slope |
||||
|
MID: Gain: + 15dB / -15dB, Frequency: Mono 250Hz - 5kHz peak Stereo 2.5 kHz peak |
MID: gain: + 15dB / -15dB, frequency: 2.5kHz peak |
||||
|
LOW :Gain: + 15dB / -15dB, frequency: 100Hz slope |
|||||
|
PEAK LED (Mono) |
The LED lights up when the post EQ signal reaches 3dB below the frame distortion |
||||
|
Level meter |
Before listening LEVEL |
2x12 - dot pitch LED level meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB] |
|||
|
Built-in digital effects (XU model) |
SPX algorithm |
24 programming, PARAMETER controller: 1, FOOT SW: 1 (FX RTN CH on / off) |
|||
|
USB audio (XU model) |
2 IN /2 0UT |
USB Audio 2.0 compatible Sampling rate: maximum 192kHz, Bit depth: 24-bit |
|||
|
Phantom power supply voltage |
+48V
|
||||
|
Power requirements |
AC100-240V,50/60Hz |
||||
|
Power consumption |
36W |
30W |
22W |
||
|
physical dimension(W x H x D) |
444mm x 130mm x 500mm (17.5”x 5.1”x 19.7”) |
444mm x 130mm x 500mm (17.5”x 5.1”x 19.7”) |
308mm x 118mm x 422mm (9.6”x2.8”x11.6”)
|
||
|
net weight |
MG20XU:7.1kg (15.7 lbs.) MG20:6.9kg (15.2 lbs.) |
MG16XU:6.8kg (15.0 lbs.) MG16:6.6kg (14.6 lbs.) |
MG12XU:4.2kg (9.3 lbs.) MG12:4.0kg(8.8 lbs.) |
||
|
Include attachments |
Technical specifications, AC power cord, Cubase AI Download information (XU Models) Cabinet mounting kit (MG20XU, MG20, MG16XU, MG16) |
||||
|
Optional accessories |
Cabinet mounting kit: RK-MG12 (for MG12XU, MG12 use), pedal switch: FC5 (XU model) |
||||
|
Operating temperature |
0 to +40℃ |
||||
MK2135 2×130W Stereo Multimedia Power AmplifierAugust 17, 2021MK2135/MK4135 Applicable to multi-functional classrooms, ordinary classrooms, and small meeting rooms.view
PC1011PIII Pre-amplifierJune 24, 2020viewwe will contact you within 24 hours.
PA Amplifiers 2026 Buyer’s Guide: Mixer, Digital, Multi-Zone & IP Models – Which One Fits Your Commercial Installation?March 26, 2026IntroductionChoosing the right PA amplifier in 2026 is critical for system integrators and ELV contractors. With the rise of IP PoE systems, digital matrix processing, and multi-zone control, the wron...view
New Arrival of DSPPA Immersive Audio System DSPPAApril 18, 2022Abstract: DSPPA Immersive Audio System makes its debut.view