MAG6506 Network Industrial Intercom Terminal

Name: MAG6506 Network Industrial Intercom Terminal
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● The panel is equipped with dialing combination keys, allowing for specific zone paging of network playback terminals, as well as paging for the entire zone , or selected areas;
● Can realize two-way intercom and paging function
● With AC220 power supply function;
● Support network broadcast function;
● Can play background music, emergency paging, alarm signals and others from the system host;
● Embedded structure design, quick to install and easy to use;

Contact now Leave message Download

Introduction
Specification

The MAG6506 network industrial intercom terminal is a fully digital analog-to-digital conversion signal processor based on TCP/IP transmission protocol, which can be connected to anywhere the network can reach. The product has the monitor speaker and pickup microphone to achieve two-way intercom and paging function The panel is equipped with dialing combination keys, allowing for specific zone paging of network playback terminals, as well as paging for the selected areas, entire zone; The remote audio data stream can output audio signals through the local unit, which is intelligently controlled by the host; there is an auxiliary audio input interface for connecting to other audio source devices (such as DVD players), and an auxiliary audio output interface for connecting to other power amplifiers to expand power. It has a web page configuration function. You can enter the IP address through the browser to open the device web page and configure the device functions and parameters. Source priority can be arbitrarily configured as network priority, line priority and mixed.

Item		Parameters
AUX IN	Input Sensitivity	350mV±50mV
	Effective frequency range of line gain limit (Frequency Response±3dB)	20Hz-20kHz
	THD (1Kz 1/3 Rated Output Voltage)	≤1%
	Noise	≤3mV
	SNR	≥70dB
AUX OUT	Output Sensitivity	1.0V±0.2V
	Frequency Response	20Hz-20kHz
	Distortion	≤0.5%
	Noise	≤0.2mV
	SNR	≥70dB
Maximum Output Power of Power Amplifier	Independent Channel Mode (Two Channels)	14W/4Ω
Maximum Harmonic Distortion of Power Amplifier		≤1%
Built-in Speaker		2W/4Ω
MIC Microphone Input	Input Sensitivity	20- 30mV
	Distortion	≤1%
	Noise	≤3mV
	SNR (30KHz Low Pass)	≥70dB
Power Supply Range (DC)		12V-14V
Overcurrent, Overheating, Overvoltage, Undervoltage Protection		Support
Package Size (L×W×H mm)		250× 205× 90
Product Size (L×W×H mm)		210× 115× 50
Gross Weight		2.4KG
Net Weight		1.2KG

PREV: MAG6808 Network Mixing Console

NEXT: MAG6421 One Key Emergency Network Intercom Terminal

Relate Products

MAG6244E 1000M 24 Ports POE SwitchJanuary 19, 2026The 1000M 24-port PoE switch features 24 10/100/1000M Ethernet ports, 4 Gigabit 10/100/1000M uplink ports, and 4 Gigabit SFP optical combo slots. Ports 1–24 are PSE power supply ports compliant with ...view
D6423/6424 Volume ControlAugust 28, 20194-channel unbalanced stereo/2-channel balanced stereo volume controller. Users could use with central control devices to control volume.view
MAG6424 4 Channels Network Speaker Line DetectorJuly 5, 2021The device MAG6424 is a 4-channel line load detector. It is used for supporting networked PA system, and can be used with two products of networked system, one or four audio output terminals, four aud...view

Leave a Message Email Us

we will contact you within 24 hours.