MAG6506 Network Industrial Intercom Terminal

Name: MAG6506 Network Industrial Intercom Terminal
Brand: Guangzhou DSPPA Audio Co., Ltd.

Features

● The panel is equipped with dialing combination keys, allowing for specific zone paging of network playback terminals, as well as paging for the entire zone , or selected areas;
● Can realize two-way intercom and paging function
● With AC220 power supply function;
● Support network broadcast function;
● Can play background music, emergency paging, alarm signals and others from the system host;
● Embedded structure design, quick to install and easy to use;

Contact now Leave message Download

Introduction
Specification

The MAG6506 network industrial intercom terminal is a fully digital analog-to-digital conversion signal processor based on TCP/IP transmission protocol, which can be connected to anywhere the network can reach. The product has the monitor speaker and pickup microphone to achieve two-way intercom and paging function The panel is equipped with dialing combination keys, allowing for specific zone paging of network playback terminals, as well as paging for the selected areas, entire zone; The remote audio data stream can output audio signals through the local unit, which is intelligently controlled by the host; there is an auxiliary audio input interface for connecting to other audio source devices (such as DVD players), and an auxiliary audio output interface for connecting to other power amplifiers to expand power. It has a web page configuration function. You can enter the IP address through the browser to open the device web page and configure the device functions and parameters. Source priority can be arbitrarily configured as network priority, line priority and mixed.

Item		Parameters
AUX IN	Input Sensitivity	350mV±50mV
	Effective frequency range of line gain limit (Frequency Response±3dB)	20Hz-20kHz
	THD (1Kz 1/3 Rated Output Voltage)	≤1%
	Noise	≤3mV
	SNR	≥70dB
AUX OUT	Output Sensitivity	1.0V±0.2V
	Frequency Response	20Hz-20kHz
	Distortion	≤0.5%
	Noise	≤0.2mV
	SNR	≥70dB
Maximum Output Power of Power Amplifier	Independent Channel Mode (Two Channels)	14W/4Ω
Maximum Harmonic Distortion of Power Amplifier		≤1%
Built-in Speaker		2W/4Ω
MIC Microphone Input	Input Sensitivity	20- 30mV
	Distortion	≤1%
	Noise	≤3mV
	SNR (30KHz Low Pass)	≥70dB
Power Supply Range (DC)		12V-14V
Overcurrent, Overheating, Overvoltage, Undervoltage Protection		Support
Package Size (L×W×H mm)		250× 205× 90
Product Size (L×W×H mm)		210× 115× 50
Gross Weight		2.4KG
Net Weight		1.2KG

PREV: MAG6808 Network Mixing Console

NEXT: MAG6421 One Key Emergency Network Intercom Terminal

Relate Products

MAG6411 Audio Acquisition ModuleJune 9, 2021MAG6411 Airport Broadcast Audio Acquisition Module is a network all-digital analog and digital converter signal processor based on TCP/IP transmission protocol. Local program, background music, voice ...view
POE1028 SNR Self-adaptive PoE Network SensorJuly 28, 2020The device will automatically adjust the volume of the broadcast sound to make it larger than the on-site ambient sound; otherwise, when the on-site ambient sound is detected too much smaller than the...view
MAG6432 32-Channel Fire Alarm Audio-Visual Linkage TerminalJanuary 9, 2026The 32-channel fire alarm audio-visual linkage terminal is designed to interface a network public address system with a fire alarm control center. Upon receiving fire alarm trigger signals, the termin...view

«
1 ...
4
5
6
7
8
9
»

Leave a Message Email Us

we will contact you within 24 hours.