DSP270E 50W POE Horn speakerDecember 18, 2023This device is a network outdoor horn speaker that can be powered by POE+ (AT standard), POE++ (BT standard), and a network active horn speaker that supports public address and intercom network system.view
DSP170E IP Network POE Active Outdoor Horn SpeakerApril 14, 2020The product is a network active horn speaker supporting network broadcast intercom system. It can support the international standard SIP protocol and accept broadcasts and calls from LAN and WAN. It c...view
DSP6114E DSP6116E PoE Outdoor Waterproof Column SpeakerJanuary 20, 2024The product DSP6114E / DSP6116E is an outdoor waterproof column speaker supporting POE and POE+ standards. It can automatically configure the output power according to the switch, and can also supply ...view
POE6311 POE IP Network Ceiling SpeakerNovember 14, 2018POE6311 IP network ceiling speaker is a network of all-digital analog-digital conversion signal processor based on the TCP / IP transmission protocol. With dual network port design, it can be attached...view
DSP168E 25W PoE Ceiling SpeakerJune 25, 2025DSP168E is a standard PoE switch supporting both PoE+ (IEEE 802.3at) and PoE++ (IEEE 802.3bt) standards. It features a built-in digital amplifier to minimize noise and is equipped with comprehensive p...view
DSP602E IP Network Ceiling SpeakerMarch 10, 2020The DSP602E is a network active ceiling speaker that supports the network PA/intercom system, support for international standard SIP protocols, can accept PA and calls from the LAN/WAN, quickly place ...view
POE6080 80W Network Outdoor Column SpeakerJune 4, 2025The Network Column Speaker is a POE-powered speaker system based on the POE 802.3bt power supply standard. It features a built-in DSP digital processor with gain adjustment, volume control, priority a...view.webp)
POE6120 120W Network Outdoor Column SpeakerJune 4, 2025The Network Column Speaker is a POE-powered speaker system based on the POE 802.3bt power supply standard. It features a built-in DSP digital processor with gain adjustment, volume control, priority a...view.webp)
POE6180 180W Network Outdoor Column SpeakerJune 4, 2025The Network Column Speaker is a POE-powered speaker system based on the POE 802.3bt power supply standard. It features a built-in DSP digital processor with gain adjustment, volume control, priority a...viewIn modern professional audio installations, the shift from traditional IP systems to PoE (Power over Ethernet) technology is driven by one primary goal: Engineering Efficiency. By integrating power and data into a single infrastructure, DSPPA PoE solutions redefine how large-scale PA systems are deployed.
Technical Comparison: Efficiency & Scalability
| Feature | Traditional IP Audio System | DSPPA PoE IP Audio System |
| Cabling Architecture | Dual cabling: Audio/Data + Independent Power | Single Infrastructure: Cat5e/Cat6 only |
| Power Management | Requires local AC/DC outlets at every point | Centralized Power from PoE Switches |
| Installation Speed | Labor-intensive (requires licensed electricians) | 60% Faster Deployment |
| Total Cost of Ownership | High material & maintenance costs | Significant reduction in Labor & Material |
| System Scalability | Limited by localized power availability | Plug-and-Play anywhere with LAN access |
Deep Dive for B2B Decision Makers
1. Drastic Reduction in Labor & Material Costs
In a traditional setup, every IP terminal requires a nearby power outlet. This often necessitates hiring licensed electricians to run high-voltage lines, increasing both time and budget. DSPPA’s PoE IP speakers draw power directly from the network switch, eliminating 100% of the localized power infrastructure costs.
2. Centralized Power Management & Reliability
By using a centralized PoE switch (with UPS backup), the entire audio network remains operational even during local power failures. This is a critical safety feature for emergency paging and evacuation systems in airports, schools, and government buildings.
3. Simplified "Plug-and-Play" Maintenance
For IT managers and low-voltage engineers, maintaining a PoE network speaker is as simple as managing an IP camera. System diagnostics, power cycling, and firmware updates are all handled via the network, reducing the need for on-site technical visits.
4. Flexible Deployment in Challenging Environments
Whether it’s a high-ceiling warehouse or an outdoor scenic spot, as long as you can run a network cable, you can deploy a DSPPA PoE speaker. Our high-power PoE solutions (up to 180W) ensure that even large-scale outdoor areas get professional-grade sound pressure without the headache of outdoor power cabling.
A PoE (Power over Ethernet) system allows a single cable to carry both power and data. For large-scale projects like stadiums or scenic spots, this eliminates the need to hire licensed electricians to install AC outlets at every speaker location. By utilizing existing PoE network switches, integrators can reduce material costs (cabling) and labor hours by up to 50%.
Following standard Ethernet protocols, the maximum distance from the PoE switch to the PoE network speaker is 100 meters (approx. 328 feet). For longer distances, B2B integrators can easily extend the range using PoE extenders or fiber-to-copper media converters, making it highly suitable for expansive facilities like airports and docks.
Yes. DSPPA’s PoE terminals, including the DSP270E and POE6311, are designed to be compatible with SIP (Session Initiation Protocol). This allows the audio system to integrate seamlessly with your client’s existing IP PBX or VoIP phone system, enabling paging directly from an office desk phone or emergency intercom.
EN
ar
bn
fr
ms
de
th
id
hi
pt
ru
es
