This product is a ceiling speaker with a coaxial design, featuring a full-range driver and a tweeter, complemented with a rear cover. It supports both 8Ω and 100V line inputs, with selectable power taps for flexible configuration. The terminal connectors are located at the front for easy installation and setup. Featuring a ported design for enhanced bass and separate tweeter and woofer, it delivers improved sound quality. With its sleek, modern aesthetics and superior audio performance, it is an ideal solution for sound reinforcement.

Model | DSP7154 | DSP7166 | DSP7181 | |
Drive Units | Full-range | 5"x1 | 6"x1 | 8"x1 |
Tweeter | 1"x1 | 1.5"x1 | 1.5"x1 | |
Rated Power (RMS) | 40W | 60W | 100W | |
Power Adjustment | 100V | 40W-20W-10W-5W-2.5W | 60W-30W-15W-7.5W-3.7W | 100W-50W-25W-12W-6W |
8Ω | 40W | 60W | 100W | |
Freq. Response | 80Hz-20KHz | 75Hz-19KHz | 70Hz-20KHz | |
Sensitivity | 87dB | 90dB | 92dB | |
Maximum SPL | 103dB | 108dB | 112dB | |
Dimension(Diameter*Height) | 235mm×135mm | 271mm×150mm | 334mm×178mm | |
Cutout Dimension | 205mm | 238mm | 294mm | |
Input Connector | 4-Pin Phoenix Terminal | |||
Grille Type | Metal Grille | |||
DSP7181 Two-Way 8-Inch 100W Coaxial Ceiling Loudspeaker with Power TapJuly 28, 2025This product is a ceiling speaker with a coaxial design, featuring a full-range driver and a tweeter, complemented with a rear cover. It supports both 8Ω and 100V line inputs, with selectable power t...view
DSP7166L 8Ω 6'' 60W Coaxial Ceiling Speaker with Rear CoverJuly 8, 2025This product is an 8Ω ceiling speaker with a coaxial design, featuring a full-range driver and an tweeter, complemented with rear cover. The terminal connectors are located at the front for easy inst...view
DSP7181L 8Ω 8'' 100W Coaxial Ceiling Speaker with Rear CoverJuly 8, 2025This product is an 8Ω ceiling speaker with a coaxial design, featuring a full-range driver and an tweeter, complemented with rear cover. The terminal connectors are located at the front for easy inst...viewwe will contact you within 24 hours.
Configuration Solution of Public Address Amplifier and Speaker (II)March 29, 2019As we all know, after the auditorium acoustical design, it is necessary to determine the power of the speaker according to a series of calculations, and then the power of the amplifier is determined b...view
DSPPA kicking off the internationalization of the National StandardNovember 25, 2016The kick-off meeting of internationalization of the National Standard – Technical code of public address system engineering (GB 50526) was held in the 798 art zone, Beijing on May 24, 2014. This meeting is hosted by Guangzhou DSPPA Audio Co. Ltd, and tenview