The evacuation in a commercial building can be triggered by a growing array of potential threats, including fires, acts of terrorism or extreme weather. With the growing number of busy, complicated or unfamiliar buildings, the process of guiding people to safety is becoming increasingly complex. Public address and voice alarm (PAVA) systems are key to giving clear messages that guide individuals to safety, which is why they are an essential part in evacuation planning.
Solution Highlight Functions
● PAVA8500/PAVA8500E control host can be expanded to 160 zones, and can realize real-time detection of bus loops, automatic system fault diagnosis, data backup, line redundancy and fault status recording (≤1000), which is safe, stable and reliable.
● The whole system supports 30 remote paging microphones or fire paging microphones, and can realize one-key paging in all zones and zone paging function.
● The whole device supports 24V power supply. When the mains power is cut off, the device will automatically check and switch to 24V backup power supply to ensure the normal fire broadcasting. The host PAVA8501 has a DC24V charger.
● The host PAVA8500 and PAVA8500E support 6 channels of auxiliary inputs, 2 channels of microphone inputs, 8 zones of simultaneous outputs with independent volume control, system timing function and background music playback.
● Only one CAT5 cable is needed between the system equipment, and the unique Dante protocol is used to transmit high-quality data audio signals and control signals. It supports hand-in-hand and star wiring connection, easy-to-operate and low-cost.
● The system has a one-key alarm function, and can customize the alarm voice, with several modes such as alarm in adjacent layer and designated zone (including all zones), easy and quick to set, suitable for different environmental alarm requirements.
● The control host adopts embedded man-machine interface, and supports multiple sets of PC software interfaces at the same time. After the control host is configured, it can operate independently from the PC software.
System Connection Diagram
1. Voice alarm broadcast preview function
In order to increase the survival method for office staff in the office building when they encounter a disaster, the system can enter the alarm test and drill mode through quick operations, and the alarm function will be disabled after finishing the drill.
2. Remote paging and timing function
This system’s remote microphone can remotely paging a single, multiple or entire zones in public areas or office areas; and it has automatic playback and timing functions to play the timing fixed-point music or off-duty ringtone in public areas or work areas under unattended operation.
3. Alarm settings and voice download function
The system can program the alarm area combination by the control software and download it to the main controller. When alarming, the main controller can control each area to enter the evacuation or early warning state according to the prewritten programs. At the same time, the alarm voice signal generator broadcasts the voice prompt signal, and broadcasts the evacuation or early warning voice in the corresponding area. The area that has not entered the evacuation and early warning state is not affected.
4. Broadcast priority function
In this system, broadcast speeches have the highest priority, and voice alarms have priority over background music. It can broadcast or broadcast recorded voice signals to any terminal combination. Multiple paging stations can set different priorities according to their serial numbers, and up to 32 remote paging microphones can be connected.
5. Flexible software operation function
With flexible operating software, it can remotely detect, control, set audio priority, view operation records, and set impedance detection parameters in the office through the computer software.
6. Background music function
It can provide background music when there is no fire alarm in the office building. Different program sources can be selected for different zones. The content and volume of each zone can be controlled by the control software and the main controller.
PAVA8000 Voice Evacuation System is designed according to EN54-16 requirements. It supports auto diagnoses of speaker line, amplifier, emergency microphone, remote paging microphone, etc. It also supports remote computer monitor and control. It is an optical voice evacuation solution for shopping mall, office building, airport, railway station, school etc.
8 Zones 500W Voice Evacuation System Amplifier
● 8 zones speaker output(could be extended up to 160 zones)
● Built in 500W digital amplifier
● One button alarm,built in EVAC message & Chime
● 8 Zones speaker output with individual volume control
● Support remote Mic zones or group paging
● DC battery backup monitoring
● Real time monitor with EMC microphone for emergency situation evacuation
● 8 dry contact trigger input/output,DC24V override output
● Support 100V Speaker AB line outputs with impedance supervision
Voice Evacuation System Software
8 Zones 500W Voice Evacuation System Extender Amplifier
● Built-in 500W digital amplifier
● zones speaker output with individual management
● Auto detection for system failure, AC/DC, paging Mic, etc.
● Zones extendable by another extender amplifier
● Support remote control via computer
● Comply with EN54-16 requirements
16 Zones Remote Paging Station
● Remote paging mic of PAVA8500
● Each microphone has 16 zones capacity
● Zones extendable by extender Mic PAVA8008E
● System indicators of AC/DC, fault, Mic, etc.
● Comply with EN54-16 requirements
● POE power supply
Remote Emergency microphones